Product	 Type	        Model	        f/w version	Program	        Program .exe
					
DVD-ROM	 Desk-top	DRD-8080B	1,04 	        dflga1b6.mot	Pxfer2.exe
	 Slim	        DRN-8080B	1,12    	s2lg57aa.mot	Pxfer2.exe
CD-RW	 Desk-top	CED-8080B	1,06    	e4lg6941.lge	rwn.exe
         		CED-8083B	1,06     	e5lgebdf.lge	rwn.exe
					
You must make a bootable cdrom disc that contains the config.sys and					
autoexec.bat files, GCSDROM.SYS,MSCDEX.EXE and the executable file 					
pxfer2.exe and dflga1b6.mot on it. 					
					
There is an excel spreadsheet that is included in the .zip file 					
you will download that will indicate to what ROM version the upgrade 					
will bring the drive to, what exe file is needed and what .mot file					
is needed. There are 2 exe's and 2.mot's and 2.lge's. The lge's are					
for the CD-RW drives, the .mots are for the DVD. Once the bootable					
disk is made, reboot the PC with the DVD drive hooked up on the				
secondary master channel and once the drive is detected and you are at				
the A:> prompt type in  pxfer2 dflga1b6.mot 				
				
The firmware upgrading will begin and you will be notified when it is 				
finished.				
				
The firmware sent for f/w upgrade is for Shrink Micom Sets (flashable)				
So when you download f/w, you must be careful about which f/w version				
you have.				
				
     CD-RW   : shrink micom set--> from version 1.05				
     DRD-ROM : shrink set--> from version 1.04				
       				
The rest of the f/w version are non-shrink micom type.				
				
     CD-RW   : non shrink micom set--> version 1.04 and less				
     DRD-ROM : non shrink micom set--> version 1.03 and less				
        				
The firmware of a non-shrink micom can't be upgraded.				
Only a (flashable) shrink micom set can be upgraded.				
